VTech 4 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone Manuel d'utilisateur télécharger pdf (Page 12)

Getting started

Wall mount installation

The telephone base comes ready for tabletop use. If you want to mount your

telephone on a wall, use the provided wall mount bracket to connect with

a standard dual-stud telephone wall mounting plate. If you do not have this

mounting plate, you can purchase one from many hardware or consumer

electronics retailers. Professional assistance may be required to install the

mounting plate.

Tabletop to wall mount installation

To change the telephone base from the tabletop installation to wall mount

installation, make sure you first unplug the power adapter from the electrical

outlet and unplug the telephone line cord from the telephone wall jack.

Plug one end of the telephone line cord into the TEL. LINE jack on the

bottom of the telephone base. Plug the small end of the larger power

adapter into the power jack on the bottom of the telephone base.

Position the telephone base as shown below. Insert the extended tabs of

the wall mount bracket into the slots on the back of the telephone base.

Push the telephone base down until it clicks securely in place.

Route the telephone line cord through the wall mount bracket hole. Route

the power cord out of the bottom of the telephone.

Slots for wall mount

bracket installation

A DSL filter (not included) is

required if you have DSL high-

speed Internet service.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

Pas de commentaire

VTech 4 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone Manuel d'utilisateur Page 12