VTech Vapor Manuel d'utilisateur télécharger pdf (Page 26)

Trouble Shooting for Printer Errors

When a printer error message appears, you may have encountered one or more of

the following errors:

1. The power cable is not plugged into the electrical outlet properly.

2. The printer cable is not securely connected between the printer and Vapor.

3. The printer is not turned on.

4. The paper has jammed in the printer.

5. The printer has run out of paper.

6. The paper did not feed in time.

Please check for these errors. Once you have solved the problem, reset the printer

or follow the Printer Connection instructions again. If you have any other problems

with your printer, please refer to your printer’s manual for details.

Connecting Vapor with the AC Adaptor (sold separately)

If you want to save battery power, you may use a standard 9V 300mA AC center-

positive

adaptor.

To connect the AC adaptor:

1. Make sure Vapor is OFF.

2. Plug the adaptor into Vapor’s adaptor jack located on the back of the main unit.

3. Plug the adaptor into a wall outlet.

Smart Cards (sold separately)

There are two types of Smart Cards. One of the Smart Cards is a Memory card,

which expands the memory in activities like Slide Puzzle Maker, Diary, and Note Pad.

If you want to store more puzzles, diary entries, and notes, we suggest you buy

Memory Smart Cards. The other type of Smart Card is a Trivia card. These cards

will expand the learning activities of Vapor.

Inserting Smart Cards

1. Insert the Smart Card into the Smart Card slot located on the back of the handheld

with the label toward the unit facing. You should feel the Smart Card click into place.

2. Tap the Smart Card icon or press the Smart Card button to play Trivia or to open

saved

data

1 2 ... 21 22 23 24 25 26 27 28 29

Pas de commentaire

VTech Vapor Manuel d'utilisateur Page 26